Order direct with Bumpechute or  Please go to Amazon to order: 

Identify your command post quickly, day or night, with Bumperchute’s Command Post Flag/Light.This handy product combines the Command Post flag and two battery-powered LED light into one convenient accessory. A 10-foot sectional aluminum Easton pole with shock cord quickly snaps together to display the CP Flag and green light at a height easily seen over other vehicles and apparatus. Two super-strong magnets hold the Flag/Light upright to any metal surface - please note some vehicles have aluminum bodies, magnets don't work on aluminum! Please check. And the Lightman™ LED light provides a full 360 degrees of visibility in either flash or steady mode to identify the post—a feature especially useful at night, in smoke, low clouds or precipitation.

• A 10-foot sectional aluminum Easton pole with shock cord quickly snaps together to display the green CP flag and green light at a height easily seen over other vehicles and apparatus.
• Two super-strong RB 80 magnets  attaches the pole to any metal surface—like the side of the vehicle. No need to drill holes into the vehicle to mount hardware. The magnetic bases are covered with protective vinyl.
• Two unique, pyramid-shaped green Lightman® LED lights, mounted on the top of the flag pole, provide a full 360 degrees of visibility in either flash or steady-on mode. Battery-powered by 4 AA batteries, the lights are visible over 2,500' (800m) on clear nights.
• The large green Flag with white “CP” lettering not only identifies the post but also establishes wind direction.
• Pole, light and flag stow away in their own 26” green stuff bag for easy access in vehicle or toolbox.
• Replacement vinyl magnet covers are provided.

Hints from the field:

• At the conclusion of the incident we would hate for you to forget to pack up the CP Flag/Light and drive off - oops. A nice visual aid to remind you that the flag/light is still set up is to attach the flag/light to your driver door and  throw the green stuff bag  over your steering wheel.
• Vehicle graphics and contour of the vehicle doors are not all the same you may need to adjust the spacing of the magnets to fit your specific vehicle. After you have the magnets set some departments place two small “Sharpie” dots on the vehicle  to mark the magnet placements.
• The magnet clamps can be bent slightly to angle the magnets flat against the vehicle side panel.

Click her for PDF